TR MULTI-CHAINS HAUL-OFFS
TR MULTI-CHAINS HAUL-OFFS
- Availability: on order
Independent drive for each caterpillar chain with A.C. motors and vectorial drive (elimination of transmission elements subject to wear - minimal maintenance and highest reliability).
- All the caterpillar chains are pulling, and consist of rubber blocks, which are especially shaped to obtain the largest surface in contact with the pipe;
- Tiltable upper caterpillar chains;
- Automatic or manual stretching of caterpillar chains;
- Higher contact length of caterpillar chains with the pipe in order to achieve the maximum haul-off force even with minimum pressure of the caterpillar chain;
- Synchronisation with any type of extruder.
TECHNICAL INFORMATION
| Type | ø mm | ||
|---|---|---|---|
| TR 125/3 | 16 - 125 | ||
| TR 200/3 | 20 - 200 | ||
| TR 200/4 | 25 - 200 | ||
| TR 250/3 | 25 - 250 | ||
| TR 250/4 | 25 - 250 | ||
| TR 400/4 | 75 - 400 | ||
| TR 400/6 | 63 - 400 | ||
| TR 500/6 | 63 - 500 | ||
| TR 630/6 | 90 - 630 | ||
| TR 630/8 | 125 - 630 | ||
| TR 800/8 | 200 - 800 | ||
| TR 1000/8 | 400 - 1000 | ||
| TR 1200/10 | 250 - 1200 | ||
| TR 1600/12 | 400 - 1600 | ||
| TR 2000/14 | 800 - 2000 |