Tactile thickness measurement
Tactile thickness measurement
- Availability: on order
The contact gauges of the VBM, VBS and VBK series have proven themselves for decades in high-precision thickness measurement in all cold rolling situations, from the foil to the heavy plate, and under a wide range of ambient conditions. They measure with an accuracy of up to ± 0.5 µm. For the production of narrow strip, they can also be combined with tactile width measurement.
Flexible from 0.005 to 19 mm
The tactile systems are employed at all stages of the strip production process – on the annealing line and in the rolling mill, on the finishing line or during strip processing as well as in the steel service centre.
We manufacture them in different versions for thicknesses from 0.005 to 19 mm.
Precise even on wavy strip
With a measuring accuracy of up to ± 0.5 micrometres per millimetre of strip thickness, our contact gauges meet the requirements of modern rolling mills. They adapt to the strip pass and follow any waviness of the material. In this way they compensate angular errors by keeping the measuring head perpendicular to the strip.
The principle – the technology in detail
The thickness is measured by using extremely precise transducers to calculate the distance between the two sensors which touch the upper and lower surfaces of the strip. The advantage of this method is that – as with the laser – the systems measure irrespective of the alloy. Material parameters do not have to be entered and updated.
Automatic zeroing
We use crowned measuring sensors made of diamond, one of the hardest materials employed in industrial applications. When the gauge is in its parking position during changing of the coils, the sensors touch one another and the system can be zeroed.